Description
Automatic multiport valve equipped with actuator and touch-sensitive buttons for control. Functions: filtration, backwash, rinse and waste. Can only be used in conjunction with a pool controller/controller, not directly connected to a filter pump. If this automatic tap is used below the water level, an automatic valve or ball valve must be installed which automatically shuts off in the event of a power failure to prevent water loss through the drainage pipe. Operates by controlling the water pressure in the pipework. It thus senses when the pressure rises and the filter needs cleaning. Can optionally be set to, for example, weekly automatic cleaning (only performed if no pressure cleaning is performed). The backwash and rinse duration can be changed. Separate button for rinsing only. Note: It is recommended to install a hydraulic safety valve (art.nr. 41899).
2″ internal threads on valve. Suitable for side mounting. For filters with inlet/outlet on the side.
