Description
This revolutionary combination of UV-C and copper electrolysis makes a chlorine-free pool possible! When using the Blue Lagoon Ionizer UV-C, pool water should be tested every two weeks. All you need to do is test the pool water parameters (specifically the copper concentration) with the simple test strip provided. If necessary, adjust the device. Other ionization systems dose your pool water with about 2 ppm of copper. With the Blue Lagoon Ionizer UV-C, a dosage of 0.7 ppm is sufficient to disinfect your pool completely and safely. By integrating this device into your pool purification system, you can reduce the chlorine concentration by 50-100%! Maximum copper concentration: 0.7 ppm. Pay attention to the water body/water grounding! After 9000 hours of operation, the UV-C output is still at least 80%.
Benefits of the Blue Lagoon UV-C ioniser:
- Made in the Netherlands.
- A chlorine-free pool with your existing filtration system.
- Up to 35% higher UV-C output due to internal reflection.
- Easy to install and maintain.
- The kit includes connection pieces Ø63/Ø50 mm glueable, 1½” internal thread.
- Choice of devices 40w and 75w. Pools 40 m³ and 75 m³ respectively.
- Maximum pressure 2 bar
Information about the device in English can be found HERE
Until an EU regulation or a national regulation is adopted, there is a conditional authorisation for the use of copper to disinfect water. The copper used in these devices, complies with the REACH registration. It is further the responsibility of the buyer/reseller to obtain information on the local regulations in force for the use of (and trade in) copper for water disinfection.
