The ideal solution for professional and compact filtration of a biological pool or swimming pond! System without hydrolysis. This filtration system is supplied fully assembled on a plastic pallet with HDPE backing. Only the pipes are connected to the pool and the power cable to the socket. <\/p>\n
This filtration system is suitable for biological swimming pools up to 80m\u00b3, for swimming ponds up to 80m\u00b3 and for example also for swimming pools or ponds with ornamental fish up to 40m\u00b3. Thanks to the self-priming pump, this set can be installed both above and below ground. <\/p>\n
ECO-FILTRATION Sustainable filtration through optimal use of water, energy and water treatment. Environmentally friendly thanks to running cost savings. <\/p>\n
WATER SAVING The bead filter is mainly cleaned with an air blower, so only a limited amount of water is lost during backwashing.<\/p>\n
ENERGY SAVING Optimum water flow thanks to low bead filter resistance. This allows the same filter capacity to be achieved with less energy consumption. Thanks to the variable speed pump, this results in lower energy consumption. <\/p>\n
CHEMICAL FREE!<\/strong> UV-C based disinfection and algae control is based on phosphate removers and the use of beneficial bacteria in liquid form. These bacteria also remove most of the organic waste from the water. This system is 100% biological and therefore safe for ponds with fish! <\/p>\n PLUG & PLAY This complete system comes pre-assembled on a plastic pallet with HDPE plastic backing.<\/p>\n TECHNICAL CHARACTERISTICS:<\/p>\n The difference between Plug & Swim Type 4 and Type 5 lies in the hydrolysis device. Type 4 is without hydrolysis and is also suitable for pools and swimming pools with aquatic plants. Type 5, the hydrolysis unit, is suitable for pools without aquatic plants. Type 5 is well suited for converting an existing chlorinated pool treatment system into a chemical-free pool. <\/p>\n Dimensions of the base 1×1,2m. Back wall dimensions 1×1,6m (h) <\/p>\n","protected":false},"excerpt":{"rendered":" The ideal solution for professional and compact (up to 80 m3) filtration of a biological pool or swimming pond!<\/p>\n","protected":false},"featured_media":101630,"template":"","meta":{"_et_pb_use_builder":"off","_et_pb_old_content":"\n
Filter kit for biological pool or swimming pools<\/h4>\nThe ideal solution for professional and compact filtration of a biological pool or swimming pond! This filtration system is supplied fully assembled on a plastic pallet with HDPE backing. Just connect the pipes to the pool and the power cord to the socket. This filtration system is suitable for up to 80m\u00b3 biopool (biological swimming pool) and up to 80m\u00b3 swimming pond or up to 40m\u00b3 ornamental fish pool or pond. Thanks to the self-priming pump, this set can be installed both above and below ground. \n\nECO-FILTRATION Sustainable filtration through optimal use of water, energy and water treatment. Environmentally friendly thanks to running cost savings. \n\nWATER SAVING The bead filter is mainly cleaned with an air blower, so only a limited amount of water is lost during backwashing. This water is 100% reusable for watering the garden! \n\nENERGY SAVING Optimal water flow thanks to low filter resistance. This allows the same filter capacity to be achieved with less energy consumption. Thanks to the variable speed pump, the result is lower energy consumption. \n\nNO TO CHEMICALS! UV-C based disinfection and algae control is based on the use of phosphate removers and liquid beneficial bacteria. These bacteria also remove most of the organic waste from the water. This system is 100% biological and therefore safe for ponds with fish! \n\nPLUG & PLAY This complete system comes pre-assembled on a pallet with HDPE backing.\n\nSAFE AquaForte puts the well-being of swimmers and their environment first. The realisation of healthy, clear and clean swimming water is key. \n\n \n\nTECHNICAL CHARACTERISTICS:\n\n3 inlet manifolds with 63mm ball valves upstream of the pre-filter, 3 return 63mm (separately adjustable with ball valve \u00d863mm).\nBypass system for heat pump with 63mm ball valves\nBypass system for phosphate filter with 63mm ball valves\n1 x oversized pre-filter (8 litres!).) with easy to clean filter basket\n1 x Victoria Silent VS pump\n1 x AquaForte UltraBead UB-60 filter (biomechanical filter)\n1 x AquaForte Buster 140 W UV-C\n1 x AquaForte Phospat 3, phosphate removing cartridge filter\n2 x AquaForte Dosatech Phosfree (liquid phosphate remover) and Microbelift Clean & Clear for dosing beneficial bacteria\n1 x junction box with 6 sockets including 16A fuse and 30mA leakage current protection","_et_gb_content_width":""},"product_brand":[],"product_cat":[98],"product_tag":[],"class_list":{"0":"post-102159","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-pool-filters","7":"product_shipping_class-kuller_alus-en","9":"first","10":"instock","11":"taxable","12":"shipping-taxable","13":"purchasable","14":"product-type-simple"},"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/basseinimeistrid.ee\/en\/wp-json\/wp\/v2\/product\/102159","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/basseinimeistrid.ee\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/basseinimeistrid.ee\/en\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/basseinimeistrid.ee\/en\/wp-json\/wp\/v2\/media\/101630"}],"wp:attachment":[{"href":"https:\/\/basseinimeistrid.ee\/en\/wp-json\/wp\/v2\/media?parent=102159"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/basseinimeistrid.ee\/en\/wp-json\/wp\/v2\/product_brand?post=102159"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/basseinimeistrid.ee\/en\/wp-json\/wp\/v2\/product_cat?post=102159"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/basseinimeistrid.ee\/en\/wp-json\/wp\/v2\/product_tag?post=102159"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}