Description
Filter kit for biological pool or swimming pools
The ideal solution for professional and compact filtration of a biological pool or swimming pond! System without hydrolysis. This filtration system is supplied fully assembled on a plastic pallet with HDPE backing. Only the pipes are connected to the pool and the power cable to the socket.
This filtration system is suitable for biological swimming pools up to 80m³, for swimming ponds up to 80m³ and for example also for swimming pools or ponds with ornamental fish up to 40m³. Thanks to the self-priming pump, this set can be installed both above and below ground.
ECO-FILTRATION Sustainable filtration through optimal use of water, energy and water treatment. Environmentally friendly thanks to running cost savings.
WATER SAVING The bead filter is mainly cleaned with an air blower, so only a limited amount of water is lost during backwashing.
ENERGY SAVING Optimum water flow thanks to low bead filter resistance. This allows the same filter capacity to be achieved with less energy consumption. Thanks to the variable speed pump, this results in lower energy consumption.
CHEMICAL FREE! UV-C based disinfection and algae control is based on phosphate removers and the use of beneficial bacteria in liquid form. These bacteria also remove most of the organic waste from the water. This system is 100% biological and therefore safe for ponds with fish!
PLUG & PLAY This complete system comes pre-assembled on a plastic pallet with HDPE plastic backing.
TECHNICAL CHARACTERISTICS:
- 3 inlets 63mm PVC-U, with ball valves, before prefilter
- 3 return 63mm PVC-U (separately adjustable with ball valve Ø63mm)
- Bypass system 1 for example for heat pump with 63mm PVC-U ball valves
- Bypass system for 2 phosphate filters with 63mm PVC-U ball valves
- 1 x extra-large pre-filter (8 litres!) with easy-open and easy-clean filter basket.
- 1 x Victoria Silent VS pump
- 1 x AquaForte UltraBead UB-60 bead filter (biomechanical filter).
- 1 x AquaForte Buster 140 W UV-C
- 1 x AquaForte Phospat 3, phosphate removing cartridge filter
- 2 x AquaForte Dosatech dosing pump, Phosfree liquid phosphate remover and MicrobeLift Clean&Clear for dosing beneficial bacteria.
- 1 x junction box with 6 sockets, including 16A fuse and 30mA leakage current protector.
The difference between Plug & Swim Type 4 and Type 5 lies in the hydrolysis device. Type 4 is without hydrolysis and is also suitable for pools and swimming pools with aquatic plants. Type 5, the hydrolysis unit, is suitable for pools without aquatic plants. Type 5 is well suited for converting an existing chlorinated pool treatment system into a chemical-free pool.
Dimensions of the base 1×1,2m. Back wall dimensions 1×1,6m (h)
